Consumables


  Consumables > Sectioning >

Wafering Blades - Solid Core - Resin Bond

 
Solid core resin bond cut-off blades consist of abrasive mineral mixed with resin to form a continuous matrix through the entire blade. Aluminum oxide is recommended for cutting ferrous metals and super alloys, while silicon carbide is best used for cutting non-ferrous metals and alloys.
Recommended for higher speed cutting on non-gravity fed saws.
Resin Bond: Recommended when sectioning hard metals or when it is important to reduce heat generation.
ALUMINUM OXIDE BLADE SAFETY DATA SHEETSILICON CARBIDE BLADE SAFETY DATA SHEET


Item# Item Name Qty Add
80-11300 Aluminum Oxide Cut-Off Blade, Resin Bond, 6" x .024" x 1.25" (150 x .61 x 32 mm), (Pk/10)
80-11305 Aluminum Oxide Cut-Off Blade, Resin Bond, 7" x .030" x 1.25" (175 x .76 x 32 mm), (Pk/10)
80-11310 Aluminum Oxide Cut-Off Blade, Resin Bond, 8" x .030" x 1.25" (200 x .76 x 32 mm), (Pk/10)
80-11400 Silicon Carbide Cut-Off Blade, Resin Bond, 6" x .024" x 1.25" (150 x .61 x 32 mm), (Pk/10)
80-11405 Silicon Carbide Cut-Off Blade, Resin Bond, 7" x .030" x 1.25" (178 x .76 x 32 mm), (Pk/10)
80-11410 Silicon Carbide Cut-Off Blade, Resin Bond, 8" x .030" x 1.25" (200 x .76 x 32 mm), (Pk/10)
80-11505 Aluminum Oxide Cut-Off Blade, Resin Bond, HV < 450, 7" x .030 x 0.5" (175 x .76 x 12.7 mm), (Pk/10)
80-11510 Aluminum Oxide Cut-Off Blade, Resin Bond, HV < 450, 8" x .035" x 0.5" (200 x 8 x 12.7 mm), (Pk/10)
80-11605 Silicon Carbide Cut-Off Blade, Resin Bond, HV < 500, 7" x .030" x 0.5" (175 x .76 x 12.7 mm), (Pk/10)
80-11610 Silicon Carbide Cut-Off Blade, Resin Bond, HV < 500, 8" x .035" x 0.5" (200 x .8 x 12.7 mm), (Pk/10)
80-11705 Aluminum Oxide Cut-Off Blade, Resin Bond, HV - 450-800, 7" x .030" x 0.5" (175 x .76 x 12.7 mm), (Pk/10)
80-11710 Aluminum Oxide Cut-Off Blade, Resin Bond, HV - 450-800, 8" x .035" x 0.5" (200 x .8 x 12.7 mm), (Pk/10)
80-11805 Silicon Carbide Cut-Off Blade, Resin Bond, HV - 450-800, 7" x .030" x 0.5" (175 x .76 x 12.7 mm), (Pk/10)
80-11810 Silicon Carbide Cut-Off Blade, Resin Bond, HV - 450-800, 8" x .035" x 0.5" (200 x .8 x 12.7 mm), (Pk/10)
 


Extended Information:

This product can be used with sectioning machines offered by Allied and other manufacturers Browse our machines >>




You May Also Be Interested In
Wafering Blades - Plated Wafering Blades - Diamond Metal Bond High Speed Cutting Fluid Low Speed Cutting Fluid